Sea Lift 1
Basic Information
| LOA |
18m |
| Beam | 9.3m |
| Draft | 0.5m |
| Lift capacity | Up to 100 tonne |
| Operational depth | Leg Length Up to 30m |
Operation
"Sea Lift 1" employs electronic over hydraulic controls for all barge jacking operations. "Sea Lift 1" in standard configuration has four spuds, one in each corner, 12m or 18m or 30m long. A central generator provides electric power to two electric hydraulic pumps, which generate hydraulic pressure for barge operations. A mobile control panel, linked by radio data link to the control unit, enables the operator to easily sight all operations.
Electronic sensors provide the operator with status indications at the control panel and electronic interlocks prevent inadvertent operation at the spud control. All of the hydraulic supply lines, valve banks and control systems that operate "Sea Lift 1" are located below deck to minimise the risk of both environmental and mechanical damage.
Features
- Clear Deck
- 600mm Diameter Moon Pool
- 600mm Diameter Rod Rack
- Road Transportable
- Road Transportable
- Fully documented Safety Management System
including risk assessed Safe Work Procedures
|
- Safety Inductions
- Drills and Procedures
- Trained and Experienced Operators
- Optional Support Vessels
- Environmental Protection Equipment
|
Specifications
| Type of Vessel |
Jack Up Barge |
| Road Transport |
5 off Extendable and 2 standard Semi Trailers |
| Operator |
Australian Barge Hire Pty Ltd |
| Survey |
WA Maritime 2C |
| Designed in |
Australia |
| Construction |
Steel |
| Length Overall |
18m |
| Beam |
9.3m |
| Depth |
1.6m |
| Draft |
0.5m – 7m depending on spud length |
| Displacement |
100 tonnes (unladen) |
| Load Lift Capacity |
Up to 100 Tonnes |
| Spud Length |
12m or, 18m or, 30m |
| Jacking System |
Electric over hydraulic |
| Hydraulic Design |
Australian Barge Hire Pty Ltd |
| Electrical Control System |
Australian Barge Hire Pty Ltd |
