Sea Lift 2
Basic Information
| LOA |
18m |
| Beam | 9.3m |
| Draft | 0.5m |
| Lift capacity | Up to 100 tonne |
| Operational depth | Leg length up to 30m |
Operation
"Sea Lift 2" employs electric over hydraulic controls for all barge operations. "Sea Lift 2" in standard configuration has four 30 m spuds, one in each corner. Two turbocharged diesel deck mounted power packs provide hydraulic pressure for barge operations, full operational hydraulic power redundancy is provided via an interconnecting valve system. A mobile control panel enables the operator to easily sight all operations.
Electronic interlocks and sensors provide the operator with status indications at the control panel and prevent inadvertent operation at the spud control. All of the hydraulic mechanisms and control systems to operate "Sea Lift 2" are located below deck to minimise the risk of both environmental and mechanical damage.
Features
- Clear Deck
- 600mm Diameter Moon Pool
- 600mm Diameter Rod Rack
- Road Transportable
- Fully documented Safety Management System
including risk assessed Safe Work Procedures
|
- Safety Inductions
- Drills and Procedures
- Trained and Experienced Operators
- Optional Support Vessels
- Environmental Protection Equipment
|
Specifications
| Type of Vessel |
Jack Up Barge |
| Road Transport |
5 off Extendable and 2 standard Semi Trailers |
| Operator |
Australian Barge Hire Pty Ltd |
| Survey |
WA Maritime 2C |
| Designed in |
Australia |
| Construction |
Steel |
| Length Overall |
18m |
| Beam |
9.3m |
| Depth |
1.6m |
| Draft |
0.5m – 7m depending on spud length |
| Displacement |
100 tonnes (unladen) |
| Load Lift Capacity |
Up to 100 Tonnes |
| Spud Length |
12m or, 18m or, 30m |
| Jacking System |
Electric over hydraulic |
| Hydraulic Design |
Australian Barge Hire Pty Ltd |
| Electrical Control System |
Australian Barge Hire Pty Ltd |
