Sea Lift 3
Basic Information
| LOA |
17m |
| Beam | 12.5m |
| Draft | 0.5m |
| Lift capacity | Up to 30 tonne |
| Operational depth (@ 30t) | Up to 25m |
Operation
"Sea Lift 3" employs electronic radio data controls over hydraulic for all barge jacking operations. "Sea Lift 3" in its standard configuration has four spuds of 12m or 18m or 30m. The spuds are located in each corner of the barge. Five normally aspirated diesel power packs provide hydraulic pressure for all barge operations, including the 8tonne meter deck crane. Operational hydraulic power redundancy is provided via the crane power pack which can be relocated to replace a failed hydraulic supply. A mobile control panel, linked by radio data link, enables the operator to easily sight all operations.
Electronic sensors provide the operator with status indications of all jacking operations at the control panel and electronic interlocks prevent any inadvertent operation at the spud control.
Features
- Clear Deck
- 400mm Diameter Moon Pool
- 400mm Diameter Rod Rack
- Road Transportable
- Fully documented Safety Management System
including risk assessed Safe Work Procedures
|
- Safety Inductions
- Drills and Procedures
- Trained and Experienced Operators
- Optional Support Vessels
- Environmental Protection Equipment
|
Specifications
| Type of Vessel |
Jack Up Barge |
| Road Transport |
5 standard and 2 Extendable Trailers |
| Operator |
Australian Barge Hire Pty Ltd |
| Survey |
NSW Maritime 2D |
| Designed in |
Australia |
| Built |
Australia |
| Construction |
Steel |
| Length Overall |
17m |
| Beam |
12.5m |
| Molded Depth |
1.250m |
| Draft |
0.5m |
| Displacement |
100 tonnes (unladen) |
| Load Lift Capacity |
Up to 30 tonnes |
| Spud Length |
12m or, 18m or, 30m |
| Jacking System |
Electronic over hydraulic |
| Hydraulic Design |
Australian Barge Hire Pty Ltd |
| Electrical Control System |
Australian Barge Hire Pty Ltd |
