Sea Lift 4

Basic Information

LOA	24m
Beam	17m
Draft	1.2m
Lift capacity	Up to 250 tonnes
Operational depth	Leg length 36m

Operation

"Sea Lift 4" employs electric over hydraulic controls for all barge operations. "Sea Lift 4" in standard configuration has four 36 m spuds, one in each corner. A central generator provides electric power to two electric hydraulic pumps, which generate hydraulic pressure for barge operations. A mobile control panel, linked by radio data link to the control unit, enables the operator to easily sight all operations

Electronic sensors provide the operator with status indications at the control panel and electronic interlocks prevent inadvertent operation at the spud control. All of the hydraulic supply lines, valve banks and control systems that operate "Sea Lift 4" are located below deck to minimise the risk of both environmental and mechanical damage.

Features

Clear Deck 600mm Diameter Moon Pool 600mm Diameter Rod Rack Road Transportable Fully documented Safety Management System including risk assessed Safe Work Procedures

Safety Inductions Drills and Procedures Trained and Experienced Operators Optional Support Vessels Environmental Protection Equipment

Specifications

Type of Vessel	Jack Up Barge
Road Transport	26 standard Semi Trailers
Operator	Australian Barge Hire Pty Ltd
Classification	Germanischer Lloyd100A5
Construction	Steel
Length Overall	24m
Beam	17m
Depth	2.4m
Draft	1.6m
Displacement	450 tonnes (unladen)
Load Lift Capacity	250 tonnes
Spud Length	12m or, 24m or, 36m
Jacking System	Electronic over hydraulic
Jacking Rate	18m per hour